Thank you for purchasing an Olympus digital camera. This guide has been designed for
those who want to become familiar with the camera in a very short time. See the Reference
Manual for more details.
Loading the batteries
Inserting/ejecting the card
Make sure the camera is turned off
(i.e. the mode dial is set to OFF).
Checking the Package Contents
1
1
Using this camera for the first time
DIGITAL CAMERA
Camera
Strap
Lens cap with string
Warranty/Registration card (North
America only)
Safety Precautions
START
2
USB cable
SmartMedia (16 MB)
QUICK START
GUIDE
Make sure the camera is turned off
(i.e. the mode dial is set to OFF).
Slide the battery compartment lock on
the battery compartment cover in the
AA (R6) alkaline batteries (4)
CD-ROMs with Windows 98 USB driver
software, Reference manual, and more.
Basic Manual
Quick Start Guide (this publication)
Software installation guide (included in
the CD-ROM package in some areas)
Static free case for SmartMedia
Labels for SmartMedia (2 pieces)
Write-protect seals for SmartMedia
(4 pieces)
Open the Card cover.
2
direction of
.
SmartMedia Instructions
Slide the battery compartment cover in the direction
of the arrow printed on it, using your fingertip. Using
a fingernail could result in injury.
4
Inserting the card
3
3
3
Insert the card fully with the contact area facing
towards the monitor side (back of the camera).
Insert until you feel the card locked into place.
● Note the orientation of the card. If it is inserted
incorrectly, it may become jammed.
Attaching the strap
Pull the string
loop through
the hole in the
lens cap.
Loosen the strap in the stopper
beforehand to adjust the strap
length.
1
4
5
Insert the batteries in
the direction shown
in the illustration.
Ejecting the card
Thread the strap through the
stopper as indicated by the
arrows. When the strap length
is satisfactory, pull on the strap
to make sure it is securely
fastened.
5
Push in the card lightly to unlock it, then pull it
out.
OLYMPUS OPTICAL CO., LTD.
San-Ei Building, 22-2, Nishi Shinjuku 1-chome, Shinjuku-ku, Tokyo, Japan
Customer support (Japanese language only): Tel. 0426-42-7499 Tokyo
Close the cover tightly.
Put the strap through the string
loop.
When using LB-01 lithium battery packs
When using AA (R6) batteries
4
2
3
OLYMPUS AMERICA INC.
Two Corporate Center Drive, Melville, NY 11747-3157, U.S.A. Tel. 631-844-5000
(Technical support) Tel. 1-888-553-4448 (Toll-free) (First 30 days after purchase)
Tel. 1-631-844-5520 (After 30 days)
4
Thread the strap through the
strap eyelet.
Close the battery compartment cover, then press it
down and slide it in the opposite direction of the
arrow printed on it.
● When pressing the battery compartment cover shut,
be sure to press the center of the cover, as it may be
difficult to close properly by pressing the edge.
● Make sure the cover is completely closed.
Note:
● NEVER open the card cover, eject the card, remove the batteries, or disconnect the
optional AC adapter while the camera is in use or the camera is communicating
with a computer. Doing so could destroy all data on the card.
6
(E-Mail) [email protected]
3
5
Adobe [Photoshop] Support
Adobe software updates and technical information can be obtained at:
7
Stopper
OLYMPUS OPTICAL CO. (EUROPA) GMBH.
(Premises/Goods delivery) Wendenstraße 14-18, 20097 Hamburg, Germany Tel. 040-237730
(Letters) Postfach 10 49 08, 20034 Hamburg, Germany
Attach the strap to the other
strap eyelet following steps
3 – 5.
2
6
Slide the battery compartment lock on the battery
Strap eyelet
compartment cover in the direction of
.
Our Hotline is available from 9 am to 6 pm (Monday to Friday)
E-Mail: [email protected]
8
Taking still pictures
Viewing still pictures
Recording movies
Full Automatic mode
Quick View
Movie mode
Press
to display Menu.
Remove the lens cap and set the
mode dial to S-Prg.
Remove the lens cap and
set the mode dial to P.
Press the
twice quickly.
● The monitor turns on and the
(monitor) button
Display the desired pictures
using the arrow pad.
1
1
2
2
1
● Pictures indicated by
are
recorded picture appears.
movie frames. T See “Playing
back movies”.
Point the camera towards a subject while
viewing through the viewfinder.
2
Press Ñ to select
S-Prg.
3
4
S-Prg
Jumps to the picture
10 frames behind.
MODE MENU
DIGITAL ZOOM
Displays the next picture.
S-prg
Press ñ
repeatedly to
Jumps to the picture
10 frames ahead.
Displays the
previous picture.
select
Movie.
CANCEL
SELECT
GO
Zoom lever
Turning the zoom
lever towards
T: Enlarges the
picture.
W: Displays multiple
pictures at the
same time.
Press the shutter button all
Viewfinder Orange lamp
7
8
the way to start recording.
● The orange lamp lights up.
● The subjects are kept in focus
all the time during movie
recording.
AF target mark
Card access lamp
To focus on the subject, press the shutter button
halfway, slowly and gently.
● When the subject is in focus, the green lamp lights up.
Press the shutter button all
the way again to stop
recording.
3
Seconds remaining
To return to the shooting mode, press the shutter button halfway.
● The monitor turns off. You can now shoot pictures using the viewfinder.
● The card access lamp blinks
and the camera starts writing
the movie to the card.
● If you use up the remaining
seconds displayed, the
camera automatically stops
shooting and starts writing the
movie to the card.
To start shooting, press the shutter button gently all
the way (fully).
● The green lamp and card access lamp blink and the
camera begins storing pictures on the card.
3
4
Green lamp
Card access lamp
● To turn off the camera
Set the mode dial to OFF.
Press
.
Point the camera towards the
subject and compose the
picture while viewing through
the monitor.
5
6
VT330501
C-3020 QSG.EN.p65
1
01.9.21, 4:46 PM
|